939 reviews analysed
1. 3M Sticky Adhesive Replacement APPS2Car Dashboard VHB Sticker Pads for Magnetic Phone Car Mount,Car Phone Holder Parts,4 Pcs Double Sided VHB Mounting Pads Car Phone Mount Base Sticker Tapes
- ➣Strong Stickness: Original 3M VHB stick adhesive pads,Double sided self sticky,1.55mm thickness black VHB adhesive pads,stronger than most adhesive pads.
- ➣Suitable for stick many kinds of material with flat hard surface.It can be used in home bathroom mirror, refrigerator,bed post, wall, locker, office, driving personnel and other related equipment replace.
- ➣Rectangular 3M VHB sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, which is stable even in bumpy roads.It is a strong sticky adhesive replacement for phone car mount.Compatible with Wizgear,Bextrix,Scosche ,Trainium ,PLDHPRO ,Ailun etc.magnetic phone car mount.
- ➣This 3M VHB adhesive pad is high temperature resistance and low temperature resistance,water-proof,Tear off non-trace.
- ➣NOTE:(1),Please don’t stick the 3M adhesive pad on very soft, rugged, texture,grease surface or leather surface.(2),Make sure the desired surface is clean and dry.(3),The 3M VHB adhesive pad is one-time use.(4),It is recommended to wait at least 24 hours ensure the sticker get the best stickiness before use.(5),WORRY-FREE:APPS2Car comes with best-in-class customer service,and lifetime warranty.Please contact us immediately if you have any problem.
1,Please don’t stick the 3M stick adhesive pad on very soft, rugged, texture,grease surface or leather surface.
2,Please remove the residual glue and clean the surface.
3,The 3M VHB adhesive pad is one-time use.please sealed preservation.
4,It is Recommended to wait at least 24 hours after stuck before using.The longer the adhesive time, the stronger the viscosity will be.
5,Peel off the yellow protective film and press it at least 2 minutes then wait for about 2 hours before peel off the other side red film.If the red protective film is hard to peel off, please press it back once and try to peel off it again, don’t touch the gel with your hand after peel off.
Step 1,Remove the residual glue.
Step 2,Clean&dry the car phone mount base completely.
Step 3,Tear off the yellow protective film.
Step 4,Stick it on the car phone mount base and press it at least 4 minutes for better connecting to the base,then wait for about 2 hours to tear off the other side red film.
Step 5,Clean and dry the smooth and hard flat surface thoroughly to ensure there is no dust or debris.
Step 6,Tear off the other side red protective film,Then stick it on the cleaned dash surface firmly and press it at least 5 minutes to ensure that the adhesive pad and the surface fully bond.It is recommended to wait for at least 24 hours before use.
If you hard to tear off the red protective film, please press it back ,then tear off it again.Don’t touch the gel with your hand after peel off the film.
4 X 3M VHB adhesive pads
1 X use manual
2. 8 Pack 3M Sticky Adhesive Replacement Compatible with Socket Mount Base, VOLPORT VHB Sticker Pads for Car Magnetic Phone Holder and 2pcs Double Sided Tape for Collapsible Grip & Stand
- Cell Phone Holder Adhesive: 8 PACK Small VHB 3m sticky adhesive exclusively designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there’s a flat and hard surface in the car dashboard
- Strong 3M Sticky Adhesives: 2 PACK more larger sticky adhesive replacement parts compatible with phone collapsible grip. With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount
- Alcohol Pads Provided: Clean the chosen area where you’d like to place your phone with alcohol pads. For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again
- Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3m adhesive sticky circles on the back of grip mount and press firmly for 5 to 10 minutes for better connecting to the car mount base. please wait 24 HOURS to use after stuck
- What You Get: Volport 8 PACK small 3m phone sticky adhesive gel, 2 PACK large 3m adhesive disc, and 2 pack alcohol pads. Our worry-free 18-month warranty and friendly customer service. NO-RISK PURCHASE! UNCONDITIONAL 30-DAY MONEY-BACK GUARANTEE. If you’re unsatisfied with this item for any reason, we’ll immediately refund your purchase price
3. Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs
- To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.
- 3M PE foam adhesive at the bottom can be fixed on textured surfaces.
- Has a diameter of around 2.76 inches, applicable to most suction cup GPS/mobile holders on the market.
- No tools required for installation.
- Buy with confidence as every APPS2Car product comes with one-year warranty.
4. WOLEYI 9CM Adhesive Mounting Disk, 3 Pack Car Dashboard Sticky Pad for Large Suction Cup Mount
- Adhesive mounting disk fits all suction cup mount within 3.6inch in diameter for adhering to dashboards.
- Quickly and conveniently exchange suction mount between windshield and dashboard with the disc.
- Sticky adhesive mounting disk support your suction mount or smartphone & camera securely on dashboard.
- 3 packed with 1-year warranty.
- Easy Installation: 1) Clean the dashboard
- 2) Remove the protective cover on the base of the disk
- 3) Press the disk to the dashboard and leave more than 30 secondds
- 4) Attach suction mount on the disc.
Woleyi 9CM Adhesive Mounting Disk (3 Pack)
1. Adhesive mounting disk fits all suction cup mount within 3.6inch in diameter for adhering to dashboards.
2. Quickly and conveniently exchange suction mount between windshield and dashboard with the disc.
3. Sticky adhesive mounting disk support your suction mount or smartphone & camera securely on dashboard.
4. 3 packed with 1-year warranty.
5. Easy Installation: 1) Clean the dashboard; 2) Remove the protective cover on the base of the disk; 3) Press the disk to the dashboard and leave more than 30 secondds; 4) Attach suction mount on the disc
Warranty and After-Sale Service
All WOLEYI products with 40-day money back and 1-year warranty,if there is any problem with our products,ensure our satisfactory user experience for you,please contact us in your convenience,we shall be pleased to survice you,and will reply you within 12h after we received your feedback.
5. 3M Sticky Adhesive Replacement for Magnetic Dashboard Car Mount Holder Base, VOLPORT 5 Pack Rectangle Heat Resistance Double Side Tape VHB Sticker Pads for Dash Magnet Phone Mounts & Ring Grip Socket
- For Dashboard Magnetic Mount Base: Volport rectangular 3M adhesive sticky replacement fit 95% stick-on dash magnetic phone car mount holder with rounded rectangle base on the market. When your magnet dashboard car holder lost its viscosity, these 3M double-faced tapes backup replacement parts mounting adhesives is a good way to re-stick/reuse dashboard car phone mount & Phone Dock. Size: 1.85″ * 0.87″, the thickness is 0.047″. Can be cut circle disk/disc to fit ring grip socket car mount’s back.
- Heat Resistance Car Holder Adhesive: These iphone dashboard car mount backing stickers is high temperature(120℃+) resistance in hot Summer Texas. Extra strong both side squares 3M VHB dashboard cell phone mount replacement adhesion pads’s stickiness is 40% stronger than original 2 side sticky glue, easy to fix your car magnetic phone holder base, heavy duty dashboard mount 3M vertical adhesive sticker tab for car mount base, stable and secure driving uber, truck, jeep, vehicle in bumpy roads.
- NOTE TO USE 3M CAR MOUNT ADHESIVE: 1.Please don’t stick the 3M replacement sticky adhesive pads on rugged, texture, grease or leather surface. 2.Make sure the desired surface is clean and dry, that means no wax, dirt or porous surfaces. 3.The 3M VHB adhesive pad for dash mount phone holder is one-time use. 4.Please wait at least 24 hours ensure the sticker get the best stickiness. 5.This magic mount adhesive replacement and car mount sticky pad replacement can be a Christmas gifts 2019.
- Easy Remove and Reattach Car Mount Sticky: These flexible double sided mighty magnetic car mount self adhesive is esay to remove, you can remove dash tray car mount stand without leaving adhesive residue. These car interior cellphone mounts 3M adhesive replacement is easy to reattach, no tool required, just peel and stick. 4pcs alcohol prep pads provided, remember to clean your cell phone holder base and dashboard surface carefully before pasting. Best car phone mount adhesive replacement.
- Warranty: Volport products provide 12 month warranty. Package comes with 5 pieces universal adhesive for ball car mount for car dashboard, 4 pack universal alcohol pads for cleaning. Sticker can use be on flat hard surface like home bathroom mirror, refrigerator, bed post, wall, locker, office, dash cam. Compatible with iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XR, ipad；Samsung Galaxy Fold, S10 Plus, S10, S10 e, note 9；Huawei P30 Pro, LG G8 ThinQ
- Google Pixel
6. MGQFY 4 PCS 80mm (3.15") Circular Double Side Sticker Dashboard Adhesive Replacement Compatible with Xiaoyi Camera/Car Mount/Windshield Pad Mounting Disk for Suction Cup Car Phone Holder Bracket GPS
- What you get:4 PCS Super Strong Double Side Sticker for Car Phone Mount Holder Bracket, GPS, Camera ,Wall holder, Dashboard Toys, Windshield,Tiles, Wall Pictures and more.
- Strong Adhesive Pads Compatible with xiaoyi camera ,Use widely:Double Sided Clear Acrylic Adhesive Disk Round Tough Sticky Tape Compatible with Mpow 033 car mount holder , Windshield Long Arm Car Phone Mount and other Car Phone Mount Holder Bracket ,GPS Camera ,Decorations, Dashboard Toys, Windshield,Tiles, Wall Pictures.Replacement Adhesive Kit for Long Arm Universal Magnetic Cradle Windshield Dashboard Cell Phone Mount Holder etc.
- CUT INTO ANY SIZE YOU NEED:You can cut pads into smaller pieces if need.
- Strong Adhesive and not leave a residue：Strong adhesive is strong yet leaves no residue when removal is required.
- These sticky pad can stick to lots of materials, such as wood, metals, glass, papers, and plastics and fabrics, etc.
Package include:4 pieces Double Side Sticker Pad.
Double Side Sticker for Suction Cups for Car Bracket Mount Holder /GPS/Camera/Wall hook/and more
7. iOttie Adhesive Dashboard Pad for iOttie Car Mounts
- Sticks to Dashboard with high quality semi-permanent acrylic tape
- Acrylic Tape sticks to almost all textured and curved surfaces
- Compatible with all iOttie Dashboard Mounts for smartphones
- We strongly recommend using a Dashboard Pad to prevent possible damage that may occur if you apply suction cup directly to your dash
- This is a semi-permanent solution
- each pad is one-time use only. Once removed, it may not be reusable
iOttie mounts are well-known for their unique Resuable Dashboard Pad. We now offer our optional but highly recommended accessory by itself for purchase. You can now have additional Resuable Dashboard Pad for improved mounting on textured or curved surfaces for your one touch mounts. Having additional Resuable Dashboard Pads gives our users more mounting location options than ever before. The Resuable Dashboard Pad can be easily attached and removed numerous times and does not leave any sticky residue behind. When the grip is losing its power, simply rinse and massage the Resuable Dashboard Pad under warm water and it will be restored back to its original condition.
8. Sticky Adhesive Replacement for Dashboard Pad Mounting Disk, VOLPORT 2pcs 3M Circle Heat Resistant Double Sided Tapes Strong VHB Sticker for Suction Cup Car Phone Holder Disc, GPS Windshield Dash Cam
- 【Designed for Suction items】Volport heat resistant 3M sticky adhesives for dashboard pad mounting base disk of suction cup phone mount. You can also adhere the adhesive to the suction cup directly. Applicable to most suction cup dashboard phone stand and other windshield long arm mount, GPS holder, tablet computer bracket, camera mount, ETC, iphone car mount, wireless charger base, dash camera mount holder, dashboard toys etc on the market. You can also cut it to the size you need.
- 【Genuine 3M Sticky Adhesive 】These phone dashboard car mount back stickers have high temperature(120℃+) resistance performance, even in Texas, you can use it without worry in hot Summer. Extra strong both side round 3M VHB circle dashboard cell phone grip replacement adhesion pads’s stickiness is 40% stronger than ordinary 2 side sticky glue. Easy to fix your car phone socket base, heavy duty dashboard mount base, you can stable and secure driving uber, truck, jeep, vehicle in bumpy roads.
- 【Easy to Install】The replacement kit comes with alcohol wipes to clean the surfaces before applying. Just peel off the old gel adhesive from mount and clean the the surface with alcohol wipe before using the new adhesive, after the surface is dried, peel off the 3m adhesive film to stick the dashboard pad mounting disc, or stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5-10 minutes for better connecting to the surface, please wait 24 HOURS to use.
- 【Easy to Remove 】These flexible double sided car suction cup mount self adhesive is esay to remove, you can remove dash tray car mount stand without leaving clear adhesive residue, no tool required. Best car phone mount adhesive replacement. Make sure the surface of the chosen area and dashboard pad mounting disk of suction cup phone mount is cleaned completely before applying a new adhesive.
- 【Package includes】2 x 2.76 inch (70mm) round sticky adhesive, 4 x alcohol pads,1 x user manual. We provide a one-year warranty and if you need any help with our product, please do not hesitate to contact us and we will provide you our best after-sale service. All we want is your satisfaction.
9. Interior Car Lights, Govee Car LED Strip Light Upgrade Two-Line Design Waterproof 4pcs 48 LED APP Controller Lighting Kits, Multi DIY Color Music Under Dash Car Lighting with Car Charger, DC 12V
- ➤Upgraded Two-Line Design – Longer wires, suitable for any model cars. The lights tape’s back come with strong 3M adhesive, two lines connect with four strip lights, no need assemble the strip light, more easy to install and hide, keep your car clean and tidy. This cigarette lighter plug has switch and indicator light, built-in fuse, effectively protect the vehicle lights.
- ➤Two Simple Control Methods – Forget the remote what easy to lose, we provide a more convenient and fashion controller, enjoy to change the color, brightness, music mode. And you can stick the controller on the nearby next you for safety drive. What’s more, you can use the “Govee Home” APP to control the light.
- ➤Music Sensor – Built-in high sensitivity mic, spectrum with light and colors adjusting automatically base on the ambient sound, and then the led lights will change their colors following the music rhythm, increase safety of driving in daytime and nighttime.
- ➤Multi-Colors – Come with RGB car LED strip, Infinitely DIY colors over 16 million colors and different tones for selection, you can customize your own unique color modes to perfect enhancement for upgrading your car.
- ➤Safe to Use – Car LED light strip has a working voltage of 12V and powered by car charger are equipped with short circuit protection and memory function. Waterproof, extremely low-heat, touchable and safety for children.
By our suggestions above, we hope that you can found Car Dash Adhesive for you.Please don’t forget to share your experience by comment in this post. Thank you!