Top 10 Dash Coin Usb Miner

0
791 reviews analysed
Rank
Product Name
Score

1. AntMiner D3 17.0GH/s X11 ASIC Dash Miner

AntMiner D3 17.0GH/s X11 ASIC Dash Miner

Feature

Description

1. Specs:
(A) Hash rate: 17.0 GH/s ±5%
(B) Power consumption: 970W. Power consumption also depends on your PSU’s efficiency.
(C) Dimensions: 14″ x 5″ x 8″
(D) Hashing algorithm: X11
(E) Compatible Coins: DASH, ADZ, ARC, ATX, BOLI, BOPS, BSC, CANN, CNO, CNT, COXST, CREVA, CRM, DP, ENT, ERY, FAL, GILL, GRN, HCC, HPC, INFX, J-x11, KASH, KURT, LGBTQ, LKC, MAR, MARX, MMM, MND, MUE, OGN, ONX, OZC, PIZZA, PXI, SAND, SEV, SMC, START, TOR, TREAU, UIS-x11, VLTC, XCXT, XVP

2. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.

3. *A POWER SUPPLY IS NOT INCLUDED.* The APW3++ PSU is recommended above all other PSUs and works with this device when using regular 110v power or 220v power. One APW3++ PSU can only power a single AntMiner D3.

4. Restocking fees for mining devices are 40%. Fees are typically waived if there is a provable failure within the first 30 days. Overclocking will void all warranties. Reach out to the seller immediately if a failure occurs within 30-days of delivery to begin troubleshooting or processing a return.

2. Antminer D3 19.3 GH/s X11 ASIC Dash Miner

Antminer D3 19.3 GH/s X11 ASIC Dash Miner

Feature

Description

1. Specifications of the Antminer D3 are as follows:

a) Hash rate: Hash rate: 19.3 GH/s (Variation of ±5% is expected)

b) Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp).

c) Dimensions of the miner: 12.6 x5.12 x 7.5″

d) Hashing algorithm: X11 – Compatible Coins: DASH, ADZ, ARC, ATX, BOLI, BOPS, BSC, CANN, CNO, CNT, COXST, CREVA, CRM, DP, ENT, ERY, FAL, GILL, GRN, HCC, HPC, INFX, J-x11, KASH, KURT, LGBTQ, LKC, MAR, MARX, MMM, MND, MUE, OGN, ONX, OZC, PIZZA, PXI, SAND, SEV, SMC, START, TOR, TREAU, UIS-x11, VLTC, XCXT, XVP

2. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.

3. It recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3. (NOT INCLUDED)

4. All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!

5. Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.

6. Please select the correct address for shipping before you submit your order because, the shipping address cannot be changed after the order has been submitted. The seller does not take any responsibility for or compensate for any loss as result of downtime caused by delays in transportation as a result of custom formalities or other reasons.

3. KeepKey – The Simple Cryptocurrency Hardware Wallet

KeepKey - The Simple Cryptocurrency Hardware Wallet

Feature

4. SecuX W10 Crypto-Asset Hardware Wallet – w/Large Touch Screen, USB – Fully Support BTC, ETH, Ripple, Litecoin, Bitcoin Cash, Digibyte, Dash, Binance, Dogecoin, GRS, XLM, ERC-20

SecuX W10 Crypto-Asset Hardware Wallet - w/Large Touch Screen, USB - Fully Support BTC, ETH, Ripple, Litecoin, Bitcoin Cash, Digibyte, Dash, Binance, Dogecoin, GRS, XLM, ERC-20

Feature

5. AntMiner V9~4TH/s @ 0.253W/GH Bitcoin/Bitcoin Cash ASIC Miner (V9)

AntMiner V9~4TH/s @ 0.253W/GH Bitcoin/Bitcoin Cash ASIC Miner (V9)

Feature

Description

Size:V9

*POWER SUPPLY IS NOT INCLUDED*
Bitmain recommends using the APW3++ or APW7 power supply.

AntMiner V9 Specifications:
1. Hash Rate: 4.0 TH/s ±5%
2. Power Consumption: 1027W ±10% (at the wall, with Bitmain PSU, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.253 W/GH ±7% (at the wall, with Bitmain PSU, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. ASIC Chip: BM1580
6. Dimensions: 301mm(L)*123mm(W)*155mm(H)
7. Cooling: 2x 12038 fans
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet (network cable not included)

Please note the following:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.
2. Each AntMiner V9 requires TEN 6-pin PCI-e connectors for 12V DC input (must be very stable power source). There are three hash boards that each require THREE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. All TEN 6-pin PCI-e power connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
3. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Power supply unit is not included. Bitmain recommends the APW3++ or APW7 power supply for the AntMiner V9.

6. AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner

AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner

Feature

Description

Scrypt Mining Hash Rate: 504MH/s (±7% is expected).
Compatible Coins: Litecoin and any other Scrypt-based coins.
Power Consumption: 800W (±10%) at the wall.
Noise level: Loud. Not for desk-top use. Sounds like a vacuum.
Chip quantity per unit: 288 x BM1485.
Rated Voltage: 11.60 ~13.00V.
Operating Temperature: 0C to 40C.
Network Connection: Ethernet (cable not included).

Notes:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.
2. Each AntMiner L3+ requires NINE 6-pin PCI-e connectors for 12V DC input (must be very stable power supply) There are four hash boards that require two 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All NINE 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
3. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Power supply unit is NOT included. Bitmain recommends the APW3++ power supply for the AntMiner L3+.
5. AntMiners are LOUD. The L3+ sounds like a vacuum and is not recommended for use within homes. Many people use basements or sheds, but returns due to noise will be subject to the full restocking fee.
Compatible Coins: Any coin based on the Scrypt algorithm. There are many dozen coins, but the most well known is Litecoin.

7. Kasse Hardware Wallet HK-1000 for Cryptocurrency High Security Virtual Currency Crypto Vault – Full ERC20 Support – Bitcoin Ethereum Ripple Litecoin Dash ZCash Bitcoin Cash

Kasse Hardware Wallet HK-1000 for Cryptocurrency High Security Virtual Currency Crypto Vault - Full ERC20 Support - Bitcoin Ethereum Ripple Litecoin Dash ZCash Bitcoin Cash

Feature

Description

Kasse is a next-generation USB connected device that secures your cryptocurrency wallets with the latest bank-grade security hardware.

The manufacturer of Kasse is specialized in blockchain-based fintech financial business and IoT Infrastructure.

Featuring a state of the art dual-chip hardware configuration (STM32L082/STSAFE-J100), Kasse stores cryptocurrency private keys within a CC EAL5+ certified secure environment featuring an AIS-31 class PTG.2 compliant true random number generator.

Your private keys can never be seen, held, or known by Kasse or any third party. They are inaccessible and locked away within the secure element of the Kasse hardware wallet, and they are only used to sign transactions when you physically confirm them on your device.

With the Kasse HK-1000, your digital currency wallets are truly yours, and you can secure them with the peace of mind and sophistication of a high-security bank.

8. SecuX V20 Crypto-Asset Hardware Wallet – Mobile-Ready Bluetooth/USB Enabled – Fully Support BTC, ETH, Ripple, Litecoin, Bitcoin Cash, Digibyte, Dash, Binance, Dogecoin, GRS, XLM, ERC20

SecuX V20 Crypto-Asset Hardware Wallet - Mobile-Ready Bluetooth/USB Enabled - Fully Support BTC, ETH, Ripple, Litecoin, Bitcoin Cash, Digibyte, Dash, Binance, Dogecoin, GRS, XLM, ERC20

Feature

9. SecuX W20 Crypto-Asset Hardware Wallet – Mobile-Ready Bluetooth Wallet w/USB – Fully Supports BTC, ETH, Ripple, Litecoin, Bitcoin Cash, Digibyte, Dash, Binance, Dogecoin, GRS, XLM, ERC20

SecuX W20 Crypto-Asset Hardware Wallet - Mobile-Ready Bluetooth Wallet w/USB - Fully Supports BTC, ETH, Ripple, Litecoin, Bitcoin Cash, Digibyte, Dash, Binance, Dogecoin, GRS, XLM, ERC20

Feature

10. ELLIPAL Cryptocurrency Hardware Wallet – Cold Wallet Titan, Multi-Currency&Token Support, Anti-Disassembly&Tampering, Internet Isolated, Easy Exchange& Trade, Support BTC Xrp ETH Usdt TRX Dash DGB

ELLIPAL Cryptocurrency Hardware Wallet - Cold Wallet Titan, Multi-Currency&Token Support, Anti-Disassembly&Tampering, Internet Isolated, Easy Exchange& Trade, Support BTC Xrp ETH Usdt TRX Dash DGB

Feature

Conclusion

By our suggestions above, we hope that you can found Dash Coin Usb Miner for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general