The Best Honeywell Return Grille Filter Fc40r1003

0
650 reviews analysed

1. Honeywell Return Grille Replacement Filter FC40R1003 20″ x 20″

Honeywell Return Grille Replacement Filter FC40R1003 20

Feature

2. 12" X 12" Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC DUCT COVER – Flat" Stamped Face – White [Outer Dimensions: 14.5 X 13.75]

12" X 12" Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC DUCT COVER - Flat" Stamped Face - White [Outer Dimensions: 14.5 X 13.75]

Feature

3. 14" X 14" Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC Duct Cover – Flat Stamped Face -White [Outer Dimensions: 15.75w X 15.75h]

14" X 14" Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC Duct Cover - Flat Stamped Face -White [Outer Dimensions: 15.75w X 15.75h]

Feature

Description

14″ X 14″ Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face -White [Outer Dimensions: 15.75w X 15.75h]

You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system. These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.

High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System

This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″ thick filter.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the *hole* in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 1.75, listed height + 1.75″.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.

100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.”

4. 12" X 12" Steel Return Air Filter Grille for 1" Filter – Fixed Hinged – Ceiling Recommended – HVAC Duct Cover – Flat" Stamped Face – White [Outer Dimensions: 14.5 X 13.75]

12" X 12" Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - Ceiling Recommended - HVAC Duct Cover - Flat" Stamped Face - White [Outer Dimensions: 14.5 X 13.75]

Feature

Description

12″ X 12″ Steel Return Air Filter Grille for 1″ Filter – Fixed Hinged – Ceiling Recommended – HVAC DUCT COVER – Flat” Stamped Face – White [Outer Dimensions: 14.5 X 13.75]

You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.

High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.

This model has ½” fin design
This model has fixed hinges so that you cannot completely remove the door for safety.
This model uses a 1″” thick filter.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”

100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

5. Truaire 170 12X12 Return Air Grille 12-Inch x 12-Inch Sidewall or Ceiling Return Air Grille, White

Truaire 170 12X12 Return Air Grille 12-Inch x 12-Inch Sidewall or Ceiling Return Air Grille, White

Feature

Description

Product Description

HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors,
DIY projects, and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project
look no further than HVAC Premium. We have the largest selection of Grilles Registers and Diffusers.

HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!

12″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 13.75″ Width X 13.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
This grille has a high standard of design, production and finish on all products.

How To Measure A Grille >
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a
20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

From the Manufacturer

Truaire 170 12X12 stamped face 1 way air flow 1/2-inch fin spaced return air grille used for sidewall or ceiling openings, 12-inch x 12-inch, white

6. Honeywell RPLS730B1000/U 7-Day Programmable Light Switch Timer

Honeywell RPLS730B1000/U 7-Day Programmable Light Switch Timer

Feature

Description

The Honeywell RPLS730B1000/U allows you to wire your lights, fans and other devices through a timer switch that can help save you money while adding a level of convenience and safety to your home. Compatible with LED and CF Bulbs, this easy-to-install Honeywell 7-day programmable timer switch handles motors, all types of lighting (compatible with electronic ballasts, compact fluorescent lights and tungsten lights up to 5 A), and offers the flexibility of 7 programs per week. The LCD screen shows time, day and load status. Manual override enables load to be turned on/off without affecting program. The unit comes with a built-in rechargeable battery and the programming is protected during power outages. LED compatibility requires neutral wire for operation. To be precise, this light switch timer functions on a 120 Volt line wire, load wire, one neutral from line side and one from the load side joined together with a wire nut. Once these components are connected with the timer, the Honeywell RPLS730B1000/U will have LED compatibility. Its also important to note that the wattage of the LED bulb should not exceed 1800 Watts.

7. Honeywell RTH2510B 7-Day Programmable Thermostat with Backlight

Honeywell RTH2510B 7-Day Programmable Thermostat with Backlight

Feature

8. 24" X 20 Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 26.5 X 21.75]

24" X 20 Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 26.5 X 21.75]

Feature

Description

24″ X 20 Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 26.5 X 21.75]

You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.

High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System

This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″” thick filter.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”

100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

9. 12" X 12" Steel Return Air Filter Grille by HANDUA | Removable Face Door HVAC Duct Cover Grille for 1-inch Filter, White | Outer Dimensions: 14.5"W X 14.5"H

12" X 12" Steel Return Air Filter Grille by HANDUA | Removable Face Door HVAC Duct Cover Grille for 1-inch Filter, White | Outer Dimensions: 14.5"W X 14.5"H

Feature

Description

Size Name:12×12 Inch

Return Air Filter Grille for 12″x12″ Duct Opening, White, Steel

* 1/3″spaced fins set at 20 degrees.
* Effectively conceals filter.
* Use standard 1″ thick disposable filters (not included).
* Removable face for easy installation and cleaning.
* Equipped with adjustable filter retainers.
* Primary use: Side wall and ceiling.
* Screws are included with the system, standard.
* All-steel construction.
* Durable white powder coated.
* Standard color is white (Ral9016).

How To Measure A Grille
Always measure the size of the duct opening (the “hole” in the duct/wall). Do not measure the entire size of the register itself. Each grille has a front face frame, that will overlay at wall joint. Entire outer size of the grille is; listed size +2.5-inch.

Understanding Width & Height
In a grille size, the first number always represents the width and the second one is the height. As an Example: If the hole on your wall/duct is 12″ wide by 12″ tall, order a 12×12.

For this particular product you’re viewing at the moment, the hole on your wall/duct opening should be 12″Wx12″H.

Click the ‘Add To Cart’ button now to order your Return Air Filter Grille!

Conclusion

By our suggestions above, we hope that you can found Honeywell Return Grille Filter Fc40r1003 for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general