Nowadays, there are so many products of titan x pascal cooling in the market and you are wondering to choose a best one.You have searched for titan x pascal cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings titan x pascal cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
686 reviews analysed
1. EKWB EK-FC GeForce GTX FE GPU Waterblock, Nickel
EK-FC GeForce GTX FE is a high-performance full-cover water block for multiple NVIDIA GeForc GTX and Titan X (Pascal) based graphics cards. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC GeFroce GTX FE water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is made of nickel-plated electrolytic copper while the top is made of quality acrylic material. The top also features two pre-drilled slots for 3mm LEDs. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. The EK-FC GeForce GTX FE water block is backward compatible with all EK-FC1080 GTX Backplates, EK-FC1080 GTX Ti Backplates, and EK-FC Titan X Pascal Backplates. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC GeForce GTX FE water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. The EK-FC GeForce GTX FE water block is compatible with all reference design GeForce GTX 1060, GeForce GTX 1070, GeForce GTX 1080, GeForce GTX 1080 Ti, GeForce Titan X Pascal and GeForce Titan Xp based graphics cards.
2. NVIDIA GeForce Titan X Pascal 12GB GDDR5X (900-1G611-2500-000)
nVIDIA 12GB Titan X Pascal DVI HDMI 3x Displayport PCI Express 3.0 x16 Graphics Card 900-1G611-2500-000
3. Thermaltake Commander FT Touch Screen 5 Channel Single 5.25" Bay Cooling Fan Controller AC-010-B51NAN-A1
- 5.5″ Touch Screen Display, 3-Pin & 4-Pin connector, 5 channels, 10 watts per channel
- Fits in 5.25″ single bay and comes with all necessary cables to connect up to 5 fans
- Performance and silent Modes for best cooling performance, automatically adjusts all fans to its fastest speed and ultimate airflow
- Auto and manual mode allow auto adjustment on all fans based on thermal sensor or user customization
- NOTE:Kindly review the videos under the image section and user manual under product details for set up and user guidance
Take command with Thermaltake’s first-ever touch screen fan controller, the Commander FT! Monitor temperatures and fan speeds for up to (5) individual 3-pin or 4-pin fans simultaneously. The expansive 5.5″ touch screen-one of the largest available-makes interacting with it simple for auto, manual, performance, and silent operating modes to give you comprehensive control of fan cooling performance. Gain control over your systems cooling needs and give your chassis a professional look with the Commander FT by Thermaltake.
4. Bitspower NVIDIA Titan X Pascal Clear Acrylic Material
- Designed with reservoir for Bitspower Dual/ single D5 top
- Only for Bitspower z-multi/ z-tube/ Z Series
- Vertical retention bracket included/ Acrylic & stainless steel top cover/ RoHS compliant
- Bits Power Bitspower water cooled PC Parts fitting personal computer water reservoir sled tube compression rotary screw adapter extender expansion Parts
- Personal, gaming, business
【Product characteristics/ specifications】bitspower dual/ single D5 top design with reservoir Bitspower Z – multi/ Z – Tube/ Z series only support vertical retention bracket Included RoHS Compliant.
5. ARCTIC Alpine 12 CO – CPU Cooler for Intel Sockets for Continuous Operation, with 92 mm PWM Fan, up to 100 Watts Cooling Power, with Pre-Applied MX-2 Thermal Compound, Easy Installation
ARCTIC offers innovative solutions incessantly – changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people’s lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor – a constant our customers rely on.
6. Arctic MX-4 – Thermal Compound Paste for Coolers | Heat Sink Paste | Composed of Carbon Micro-Particles | Easy to Apply | High Durability – 4 Grams (1 Pack)
- [BETTER THAN LIQUID METAL]: Composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated efficiently.
- [SAFE APPLICATION]: The MX-4 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards.
- [HIGH DURABILITY]: In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time. Once applied, you do not need to apply it again as it will last at least for 8 years.
- [EASY TO APPLY]: With an ideal consistency, the MX-4 is very easy to use, even for beginners.
- [THERMAL COMPOUND]: Formula, the MX-4 guarantees exceptional heat dissipation from the components and supports the stability needed to push your system to its limit.
Thermal Compound for All CoolersEasy to ApplyWith an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.Safe Application:It does not contain any metallic particles so electical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.High Durability :In contrast to metal and silicon thermal compound, the performance of MX-4 does not compromise over time. Once applied, you do not need to apply it a second time as it will last at least for 8 years. Value for MoneyA high performance thermal compound perfect for system builders, there’s no suprise that the MX-4 exceeds your expectations for its low price tag. Thermal Conductivity 8.5 W/(mK) Viscosity 870 poise Density 2.50 g/cm³ Volume Resistivity 3.8 x 1013 Ω-cm
7. Asus ROG RYUJIN 240 RGB AIO Liquid CPU Cooler 240mm Radiator (Dual 120mm 4-Pin Noctua Ippc PWM Fans) with Livedash OLED Panel and Fanxpert Controls
- 1.77” full-color OLED panel for real-time system stats and personalized logos or animations via Asus livedash software controls. Air flow – 122 CFM. Noise level – 29.7 decibels
- Industrial-grade 2000 RPM PWM noctua radiator fans and software control via FanXpert reduces unnecessary noise while keeping your system
- Patent pending embedded Micro fan inside the pump housing to maximize cooling performance on the VRM and M.2
- Aura Sync addressable RGB lighting features a nearly endless spectrum of colors with the ability to synchronize effects across an ever-expanding ecosystem of AURA Sync enabled products
- Aluminum pump cover and reinforced, sleeved tubing ensure high durability
The ROG ryujin series delivers optimal cooling performance in a 240mm AIO CPU cooler. Industrial-grade Noctua radiator fans optimize airflow and static pressure while FanXpert enables total software controls. Aura Sync RGB and a 1.77” OLED allow for limitless customization via live dash to pair perfectly with Asus motherboards.
8. NVIDIA Titan RTX Graphics Card
- OS Certification : Windows 7 (64 bit), Windows 10 (64 bit) (April 2018 Update or later), Linux 64 bit
- 4608 NVIDIA CUDA cores running at 1770 MegaHertZ boost clock
- NVIDIA Turing architecture
- New 72 RT cores for acceleration of ray tracing
- 576 Tensor Cores for AI acceleration
- Recommended power supply 650 watts
- 24 GB of GDDR6 memory running at 14 Gigabits per second for up to 672 GB/s of memory bandwidth
NVIDIA TITAN RTX is the fastest PC graphics card ever built. It’s powered by the award-winning Turing architecture, bringing 130 Tensor TFLOPs of performance, 576 tensor cores, and 24 GB of ultra-fast GDDR6 memory to your PC.
9. Phanteks PH-GB1080TiMS_BK01 GPU Full Water Block MSI Gaming RGB Lighting Black
- Glacier G1080Ti is a full cover water block. The G1080Ti Series water block covers the entire PCB of the card allowing the graphics card and its VRM to remain cool and stable
- The G1080Ti Series water block has a 9mm copper base for higher level of heat dissipation and heat transfer. The sealing is ensured by DuPont Viton rubber washers
- The Military-Grade Viton increase temperature capability and stand up to aggressive fluids. The Viton rubber washers offer ruggedness so seals and components resist damage during installation and use
- The Viton retains sealing force to prevent leaks even after compression for long periods. Glacier G1080Ti Series uses the same RGB connector as our Phantoms cases so installation will be a breeze
- Use the included RGB adapter (PH-CB4RGB), you can sync with motherboards’ that support 4pin RGB header including the ROG AURA/MSI Mystic Light
The Glacier G1080Ti MSI Gaming Series is made from premium materials and finest standards of craftsmanship from Phantoms. From military standard Viton O-ring to the RGB LED lighting, all of our exceptionally high-quality materials are carefully selected. The water block features a nickel-plated copper cold plate, acrylic top and sandblasted cover plates for an elegant look.
10. Cooler Master Vortex Plus – CPU Cooler with Aluminum Fins and 4 Direct Contact Heat Pipes (RR-VTPS-28PK-R1)
- Air flow – 54.8 CFM. Noise level – 35.0 decibels
- Compact profile design for HTPC chassis and LAN box chassis
- Universal mounting for Intel LGA1366/1156/775 and AMD AM3/AM2/940/939/754 sockets
- 4 x Direct Contact heatpipes for seamless contact between CPU surface and cooler
- Aluminum fins with 4 x direct contact heat-pipes to provide excellent heat dissipation
- Value-added features – 4 port USB, 2 rear cable clips, side handles for cable management.
Cooler Master Vortex Plus RR-VTPS-28PK-R1 92mm CPU Fan For Intel LGA 1366/1156/1155/1150/775 & AMD Socket FM2+/FM2/FM1/AM3+/AM3/AM2/940/939/754
By our suggestions above, we hope that you can found Titan X Pascal Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!