833 reviews analysed
1. Zurn RK1-720AB Wilkins Pressure Vacuum Breaker (PVB) Bonnet Repair Kit for 1/2" to 1" Model 720A and for 0.5" to 1"
2. Zurn 34-720A Wilkins Pressure Vacuum Breaker 3/4-Inch Assembly
- Maximum working water pressure 150 PSI
- Maximum working water temperature 110 DegreeF
- Hydrostatic test pressure 300 PSI
- End connections threaded ANSI B1.20.1
- All bronze body and bonnet construction
- Standards Compliance: ASSE Listed 1020, IAPMO Listed, CSA Certified
- Main valve body: Cast Bronze ASTM B584
- Fasteners: Stainless Steel, 300 Series
- Elastomers: Silicone (FDA approved), Buna Nitrile (FDA approved)
- Polymers: Polypropylene (FDA approved), Delran (FDA approved)
3. Zurn RK1-420 Wilkins Complete Repair Kit for 1" Model 420/420XL and for 1" Pressure Vacuum Breaker (PVB)
4. Wilkins Repair Bonnet for 1/2"-1" 720A Pressure Vacuum Breaker
5. Wilkins 721-20 Repair Bonnet for 1/2"-1" 720A Pressure Vacuum Breaker
6. FEBCO 765 3/4′ PRESSURE VACUUM BREAKER COMPLETE DEVICE
Febco, 3/4″, 765 Pressure Vacuum Breaker EDP , Used To Protect Against Health Hazard & Non-Health Hazard Backsiphonage Conditions For Lawn Sprinkler Irrigation Systems, Swimming Pools, Laundries & Industrial Plants, All Bronze Body For Durability With 1 Check Valve & An Air Opening In On Assembly, Lightweight Poppet Seals Air Opening Under Minimum Flow Conditions, All Internal Parts Serviceable In Line From Top Of Unit, Designed For Minimal Head Loss, Engineered Plastic Bonnet Protects Valve Body Form Freeze Damage, To Repair Damaged Bonnet & Poppett Use True Value Bobbet Poppett Repair Kit Febco #953422, Pressure Vacuum Breaker Assemblies Should Be Installed At Least 12″ Above The Highest Piping & Outlet Downstream Of The Assembly To Preclude Backpressure, Assemblies Should Be Installed So They Are Easily Accessible For Maintenance & Periodic Tests, Asse 1020, Csa B64.1.2 & UPC Code Approved & Listed.
7. Zurn RK1-720A Wilkins 1-Inch Rebuild Kit for 720A
8. Zurn 1" 710 Pressure Vacuum Breaker Assembly, Model Number: 1-710
The 1″ Zurn Wilkins 710 Pressure Vacuum Breaker Assembly protects against backsiphonage of contaminated water into the potable water supply where a potential high health hazard exists. With fewer parts and a lightweight, compact body, the Zurn Wilkins 710 Pressure Vacuum Breaker Assembly is a low-maintenance, cost-effective solution for high-hazard irrigation applications – commercial or residential. It also features a maximum pressure of 150 psi and a temperature range of 33°F to 140°F. The 710 is more compact than any competitor valve in the marketplace. Bring effortless performance to any residential and commercial irrigation systems.
9. Orbit Sprinkler System 3/4-Inch Brass Atmospheric Vacuum Breaker 51059
The Atmospheric Vacuum Breaker is designed to prevent potential contaminants from entering the main water supply through sprinkler heads throughout an irrigation system. Features and Benefits: With a heavy-cast brass body and the ability to withstand up to 150 psi, the Atmospheric Vacuum Breaker will work reliably for any lawn irrigation sprinkler system or garden sprinkler system.
From the Manufacturer
The Atmospheric Vacuum Breaker is designed to prevent contaminants from entering the main water supply through sprinkler heads. It is not designed to be used as a mainline anti-siphon device.
By our suggestions above, we hope that you can found Wilkins Pressure Vacuum Breaker Bonnet for you.Please don’t forget to share your experience by comment in this post. Thank you!